Month: November 2012

Oven-less Turkey

 

It’s our first Thanksgiving here at the Pink Lady. A lot of work has gone into the house – unfortunately none of it in our kitchen. As a result, we don’t have a working oven. Using the charcoal grill left by the previous owners, as well as a few bags of charcoal – voila! Behold our delicious Thanksgiving turkey!

Advertisements

Yes, we’re still here…

 

It has been a while since the last post. As with any reno project, sometimes life gets in the way. We’ve been tackling smaller projects that we can start and stop as needed. For example, we’ve been stripping our shutters, which is easy – yet incredibly time consuming. Most of our front windows have shutters, all of which are painted in and caked with many layers of paint and goop. At 8 panels per window x 5 windows, there are a lot of shutters in need of some love…

First we removed the shutters and labeled them so that they can go back in the correct location. They are probably interchangeable, but didn’t want to risk it.

 

Cue the tools: PeelAway6, Mineral Spirits, Denatured Alcohol and a variety of scrapers, brushes and small metal tools that will help get paint off the small crevasses. And gloves. You’ll need many pairs of gloves, as they quickly get sticky and unusable.

 

 

The next step is to apply a generous layer of PeelAway6. I have tried all the other non-toxic products and PeelAway6 seems to work the best. It’s a bit hard to find these days, as Home Depot doesn’t seem to carry it anymore.  As the chemicals react with the paint, you’ll see some bubbling. The shutter on the left is almost ready to peel, while the one on the right still has some time to go.

 

 

Once the surface is nice and blistered, use a scraping tool to peel off the paint. In this case, there is an almost intact layer of paint below, which will require a second application.

 

 

Using the scraping tool and a hard bristle brush with mineral spirits, you’ll eventually get to something like this: the first few layers of paint cleared up, ready for a second application of paint stripper.

 

 

Cue the PeelAway6 again:

 

 

After three applications of paint stripper, the shutters look like this – it’s one of those “it will get worse before it gets better.” At this stage I find it’s actually more effective to use denatured alcohol to remove the last stubborn bits of paint. For bigger clumps, however, another application of paint stripper may be needed.

 

 

The back sides of the shutters (the side that is visible only when the shutters are open, was covered in old varnish. The finish has deteriorated over the years, becoming sticky and splotchy. Luckily, varnish is super easy to remove. Apply a bit of denatured alcohol with an old brush and wipe clean with a rag.

 

Here is my disclaimer: If you tackle any projects that involve old paint,you have to be aware of lead paint. When in doubt, assume it’s lead paint and don’t anger it –  meaning if the paint is in good condition, it’s safe as is and you can just paint over it. You can have paint chips professionally tested to determine whether it’s lead or not. I find that the do-it-yourself kits available at the hardware store are hard to use and the results seem to be inconclusive (at least the ones I tried). You should never ever (ever!) sand anything that contains lead paint, as it’s super bad if it gets airborne. Little bits and flakes of lead paint are also dangerous, particularly to kids.